Classic Truck Cup Holder – 67-72 GMC Chevy Truck
Our 1967-1972 Chevy truck cup holder is a direct bolt in replacement for your classic pickup. Finally, an inexpensive and rigid solution to an age old problem.
1967-1972 GMC / Chevy C10 Truck Cup Holder Features:
- ✅ No drilling required.
- ✅ Laser cut from 16 Gauge Stainless Steel.
- ✅ Choice of 2 or 3 drop in style stainless steel cups fit a wide range of beverages and or stash spot for coins, pens, or whatever will fit.
- ✅ Easy installation.
There are 4 types of cup holders:
- ✅ Double Barrel w/ Small Cups
- ✅ Double Barrel w/ Step Cups
- ✅ Double Barrel w/ 1 Large and 1 Small Cup
- ✅ Triple Barrel w/ Small Cups
These classic truck cup holders stick out from the dash 7.5” and 2” down from the bottom of the dash. If you have a 4x4, aftermarket shifter or transfer case shifter please verify that they will work for your application prior to purchasing.
Check out our install video on YouTube and see how easy these classic truck cup holders are to install.
Additional information
| Weight | 0.4 kg |
|---|---|
| Dimensions | N/A |
| Truck Year | |
| Truck Make | |
| Truck Model | Blazer, C10, C20, Cheyenne, Jimmy, K, K10, K20, K5, Suburban |
| Material | |
| Brand | |
| Product Types | |
| Interior / Exterior | |
| Style | Double Barrel (Small Cups), Double Barrel (Step Cups), Double Barrel (1 Step Cup, 1 Small Cup), Triple Barrel (Small Cups) |
31 reviews for Classic Truck Cup Holder – 67-72 GMC Chevy Truck
People also liked…
Here are some other popular Classic Truck Parts for your custom build!
Related products
-
Classic Cup Holder – 69-80 K5 Blazer
Original price was: $83.99.$71.50Current price is: $71.50. Add to cart -
Bed Wheelhouse – 4″ Wider – LH or RH (Sold as Each) – 67-72 Chevy GMC C/K Fleetside Pickup; 69-72 Blazer; 70-72 Jimmy
$270.99 Read more -
Front Bed Panel – OE Style (Steel Floor) – 67-72 Chevy GMC C/K Fleetside Pickup
$287.99 Add to cart
Brent Camerlinck (verified owner) –
Jody P. (verified owner) –
Great Price. Quick Shipping. Easy Install.
Trevor Fox (verified owner) –
easy to , install , and looks great
Lewis Loughlin (verified owner) –
Cup holder fitted perfectly took under a minute to install looks excellent and strong enough to hold a couple of Monster cans! Exactly what I wanted
Logan C. (verified owner) –
Great product
Fred (verified owner) –
Fit great, looks great!
Gerald Hansen (verified owner) –
Kenny (verified owner) –
The perfect addition to my 68 C10.
Scott (verified owner) –
Very fast shipping,very well packaged, looks great in my truck
Steve B. (verified owner) –
Product is great i just didnt realize the small cups would be so small. I can fit a paper coffee cup in them but thats it.
Will now have to order the large cup one.
Kristopher H. (verified owner) –
Fits good, small holder holds a can perfectly. Haven’t tried big cup yet but was more hoping it would hold phone and doesn’t like to sit in it. The covering over the stainless is a bit difficult to peel out around where the cup holder pinches it to the plate, but was able to get it all off. Overall am satisfied with it.
Tony C. (verified owner) –
chris (verified owner) –
best cup holder made for old c10’s
Austin C. (verified owner) –
Great product! Easy and painless install works great
JASON F. (verified owner) –
Very nice product, well made. Very sturdy mount and it was a perfect fit. My only issue is that the small cup holder is just barely big enough for a can to fit in it. If you have any kind of can cooler on it (even the most slim type)… it will not fit.
Ezekiel R. (verified owner) –
Easy install and works great. I’m not sure if the smaller sized holder would fit fastfood cups better. Only way to make it better is if it was deeper.
Luke H. (verified owner) –
Pair as well with the door panels just a little loose because there’s only two screws holding it in.
Fred J. (verified owner) –
Looks great. Haven’t installed yet as still installing the vintage air. Will work good since I decided no cup holder in center console. Just a couple of screws so I can take out when not on road trip. Might be a knee knocker for third center seat.
Bob Dougherty (verified owner) –
Brendan Geggatt (verified owner) –
This was my first update to my already restored k5. Love the stainless and it mounted in minutes, the wife was proud! Iced coffee rides are much easier now.
Rod R. (verified owner) –
Looks and works perfect. Very pleased.
Bryant C. (verified owner) –
Great addition to the 72. Choose the bigger cup holders so I could plop my phone in one and drink in the other!
Ruben (verified owner) –
I’ve had my truck for 15 years and not having cup holders was an issue and this answered my prayers. Looks and works great!
Anonymous (verified owner) –
John B. (verified owner) –
Steven Roberson (verified owner) –
Nice part
Eddie Rivera (verified owner) –
Awesome cup holder. Easy to install and much better than the other designs out there that eliminate the ash tray and block the heater controls.
Sergio Salcedo Jr. (verified owner) –
Great cupholder! I recently bought my 2nd one (stepped cup) for my 69 C15. They are strong enough to hold up blended large drinks.
Definitely recommend!
Kris Hauser (verified owner) –
Thanks so much for taking the time to leave a review John. Glad you are happy with your cup holder!
John bivens (verified owner) –
Flawless design, 5 minute installation. Should have order this several years ago. Thanks LS Fab.
ffelix1983 (verified owner) –
Awsome product! No more holding soda cans. installation is super easy 👍